Bi-Xenon: Morimoto Mini D2S Stage III

SKU
mori-PR56, S100, BL12, MM.N.061, H10
$443.00
In stock
Bi-Xenon: Morimoto Mini D2S Stage III
Bi-Xenon: Morimoto Mini D2S Stage III is available to buy in increments of 1

Product Description

Bi-Xenon Projectors: Are bound to change the game, yet again. Head to head with any OEM projector, the quality is spot on, but the Morimoto Mini D2S Projector 4.0 is: 1) So much easier to retrofit with their extra long mounting shaft and 2) So much brighter. They actually failed to pass FMVSS108 testing only because the measured lux at certain points throughout their beam pattern exceeded the maximum allowed! With 4th generation Mini D2S optics powering across their curved cutoff shield and through the standard Kuria Optic clear lens, the Mini D2S 4.0 is a force to be reckoned with. Razor Sharp, unbeatable width, perfectly distributed gradient of light down to the foreground, and a high beam that’ll put some off road LED bars to shame.

Shrouds: Basically, they're the trim piece that adds the finishing touch to your new headlight retrofit. They cover the bi-xenon projector after it’s installed to restore the factory-finished look inside the housings. With so many different shapes, sizes, and designs available; we really recommend picking one that suits the geometry inside of your headlights, and also your personal preference on how they look. Check out all of the projector shroud options we offer, and take your pick!

HID Ballasts: Morimoto’s XB ballasts are a functional work of art. While the industrial-edge design by California native Artur Saakyan looks great from the outside, they’re packed with too much modern tech on the inside to cover it all in one place. Their DSP 3.0 circuit maximizes reliability, input and output efficiency. Their ability to warm the bulbs up to full operating intensity quickly is matched by few. Hardly are all aftermarket-HID ballasts the same, and the XB’s make that clear in most every category in our opinion.

D2S HID Bulbs: Homegrown by Morimoto to out-perform any alternatives on the market when installed in projector-based headlights…and it shows. We admit the latest generation XB HID bulbs are pretty impressive when compared to other bulbs, and even older Morimoto bulbs. At the heart of the XB bulbs is their perfectly-aligned 100% Philips quartz glass capsule that houses high quality halide salts from German-supplier Messer. In our annual lux comparison test, they produced nearly the same luminosity (intensity) as the industry benchmark Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.

Wire Harness: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. How good your bulbs are. If your harness is a piece of crap, when it gives out your headlights are gonzo. Morimoto’s harnesses are the best on the market and easily worth their premium price compared to cheaper alternatives. No matter which one is right for your application, the harness features triple-sealed central relay packs, 14ga stranded copper wiring, over-molded fittings, and plug-n-play functionality. This will ensure everything properly (and permanently) works with your vehicle’s original in-cabin controls.

Optional Canbus Harnesses: Instead of a traditional relayed harness that draws power from the battery, Morimoto’s Standalone Canbus harnesses use two individual sub-harnesses to keep a load on the factory wiring. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. We generally recommend them for use on most modern European applications instead of normal harnesses since they do a great job at providing stable power to the ballasts and canceling bulb out warnings.

Optional LED Halos: Though LED halos may not be for everybody, if you’re looking for the cleanest, most simple, most reliable setup, we highly recommend the Profile Performance Pivot Halos. Not only are they the brightest, most uniformly lit halos currently on the market, but they double as a switchback turn signal with your blinker circuit. The integrated controllers are extremely easy to setup with only three wires (white, amber, and ground) and allow you to run the white mode continuously until interrupted by the signal – at which point they will blink amber. Once the signal stops, the Pivot ring will automatically switch back to its pure white mode.

Optional Housing Sealant: Protection is priceless! When you're putting together a set of high-end headlights, the last thing you want is moisture in 'em the first time it rains outside. RetroRubber is the most effective way to make sure the original seal is fully restored. For the small price, why anybody wouldn’t prevent their new headlights from fogging up is beyond us. It’ll be the best twelve bucks you’ve ever spent.

Overview Video: Check out this helpful video to see how easy Mini D2S projectors are to install!

TRUSTED: For almost 2 decades, we've sold some of the most exciting lighting products. Car guys world-wide know that Umnitza has some of the brightest and best angeleyes at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes.

  • What's Included

  • PROJECTORS: 2x Morimoto Mini D2S 4.0

  • SHROUDS: 2x Your Preference

  • HID BALLASTS: 2x Morimoto XB35 D2S or XB55 D2S

  • HID BULBS: 2x Morimoto XB

  • WIRE HARNESS: 1x Your Preference

  • WARRANTY: 5 Years (35w) or 3 Years (50w)

  • OPTIONAL HOUSING SEALANT: 1x Morimoto RetroRubber

  • OPTIONAL LED HALOS: 2x Profile Pivot

  • Compatibility

  • APPLICATIONS: Universal / Size Allowing

  • CAPABILITIES: Both Low & High Beam

  • PROJECTOR WIDTH: 88mm

  • PROJECTOR HEIGHT: 73mm

  • PROJECTOR DEPTH: 138mm

  • PROJECTOR LENS: 3.0 Inches (or 2.25" x 2.75" square lens)

  • MOUNTING SHAFT: 35mm diameter (H4 direct fit)

  • MINIMUM HOUSING DEPTH: 117mm

  • WIRE HARNESS: Match your original bulb size

  • SHROUDS: All styles except "Mini" models

  • LED HALOS: Varies according to shroud style

  • CERTIFICATIONS: Exceeds DOT requirements

  • Tech Specs

  • OPERATING RANGE: -40C to +125C

  • XB BALLAST INPUT: 9-32VDC

  • XB BALLAST OUTPUT: 85VAC 35/50W

  • XB BALLAST MAX V: 25kV (at start-up)

  • XB35 BALLAST LIFESPAN: 2500 Hours

  • XB55 BALLAST LIFESPAN: 2000 Hours

  • 3000K BULBS: Golden Yellow (~2800 lm)

  • 4500K BULBS: Warm White (~3500 lm)

  • 5500K BULBS: Pure White (~3400 lm)

  • 6500K BULBS: Cool White (~3200 lm)

  • XB55 50w Ballasts: (+20% intensity) (-1000K color)

Length 3in
Only registered users can write reviews. Please Sign in or create an account