Ford Mustang Umnitza Orion LED Angel Eyes 2010-2014

$179.99
In stock
SKU
ae-fm0v201mc
Ford Mustang Umnitza Orion LED Angel Eyes 2010-2014 is available to buy in increments of 1
Ford Mustang Umnitza Orion LED Angel Eyes 2010-2014

Title:

Ford Mustang Orion V2 LED Angel Eyes

Application (Please consult your owner's manual for your application fitment type):

Different applications will vary depending on:

Halogen

Xenon

Retrofit

 

Product Description (may describe some optional equipment) :

These halos can come in a variety of applications from horseshoe style single ring sets to double ring variety multi-color as shown in our feature photo. The headlights can also be options with standard red demon eyes or even a multi-color demon eyes set with Android or iPhone controller.

 

We recommend giving us a call to go over all the details if something isn't completely clear. The finished product is superior angel eyes to anything on the market from Advanced Automotive Concepts (AAC) otherwise known as "Oracle" lighting.

  • 2 or 4 Halos - White or Multi-Color

  • 1 full wiring harness

  • Lifetime Warranty

  • Online Instructions

  • All Hardware and Installation Included

Install Detail:

  • Requires cutting of the headlights. Please review our online www.youtube.com/umnitza channel that shows how to cut E60 Headlights.

  • 3-7 hour complete using standard hand tools per side.

Benefits:

  • Updated Look

  • Allows you to clear or black out your turn signal at the same time

  • Can be wired as DRL (daytime running lights)

  • Significant improvement in visual appeal of car

 

Choose the Xenon Option Below to Upgrade Your Headlights

 

 

Install Tips:

  • PRETEST the bulbs, do not flex the bulbs in any way.

  • Mount the controller UNDER the headlights on a flat, dry and vibration free surface

  • Ensure secure connections to and from the headlight.

GENERAL INSTALL INSTRUCTIONS (May require additional steps)

1) Remove bolt from fender liner in the wheel well.
2) Remove bolt holding bumper edge just inside peeled back fender liner.
3) Remove all the bolts at the bottom of the bumper
4) Remove 5 pins from the top of the bumper
5) remove bumper.
6) Remove fender bolts holding lights
7) Remove top 2 bolts holding lights
8) Disconnect as many connections as possible prior to...
9) Pulling light out
10) CUTTING IS REQUIRED TO OPEN THIS HEADLIGHT
11) Remove 4 screws holding back of light against front of light plexi, gently slide plastic tabs off the front plexi while doing this.

12) Remove inner beauty trim's 2 screws. BE CAREFUL TO NOT 

13) Place rings at respect corners - 1 dap of glue - less than an teardrop worth at the corners of the rings and the bottom of the ring center.
14) Insert ring botton FIRST, then push gently tops of rings onto bevelled edge of trim piece.
15) Hold for 2-3 minutes (use QUICKGRIP for best results or soldering)
16) Wait 60 minutes for glue to fully set.
17) Push wires out the back of high beam and low beams respectively, remove the rubber caps frist, then seal rubber caps OVER the wires.
18) Put back into oven for 5 minutes, seal up headlight and re-insert all screws.

 
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account