This is for a pack of twenty (20) Torx T8 screws for our Stage Series LED light bars.
These are small Torx T8 screws, painted black, used to hold the front frame to the housing of our Stage Series Light Bars. If you've stripped an original screw, use these to replace it!
The screws can be replaced using a Torx T8 screwdriver. We recommend installing one of the middle screws first. If the screw does not twist easily, you are most likely not aligned with the original threading. Reposition and try again. Then moving diagonally, install the second screw. Like a wheel on a car, it is important to install the frame with uniform pressure, or one side may lift up and misalign the gasket. Work your way around, installing the rest of the screws and then tighten. Do not overtighten - they should be firm, but not forced.
NOTE: These are designed to be used with our .
| Length | 3in |
|---|
