2003-2009 Nissan 350Z Z33 Facelift Style JDM Black DEPO D2S Bi-Xenon LED Projector Headlight
Fitment:
2003-2009 Nissan 350Z Z33 With Factory Xenon Models Only
Features:
- True 06-09 Facelift Style with Bi-Xenon Projector Lens
- JDM Style Black Housing Projector lens with Bi-Xenon Shutter Built-In - Excellent for increased visibility
- D2S Sized bulbs used for Low/High Beam (Bulbs and Ballasts are NOT included, please re-use factory bulbs and ballasts which is a direct transfer from stock headlight to the new ones)
- x4 Bulit-In LED nodes for parking light will light up AMBER LED, same as the factory ones. T10 Wedge bulb slot is located next to the projector lens. Parking Signal Light uses 3157 size bulbs (bulbs are not included)
- SAE / DOT Approved
Contents:
- 2 Piece Set (Left + Right) - (ISO 2001 Certified Company - Excellent Quality!)
Condition:
Brand New - 100% Never Been Used
Notes:
* No Bulbs are included from Manufacturer - Headlights uses D2S (High/Low Beam) / 3157 (Signal) / Built-in 4 Amber LEDs (Parking Light) / T10 Wedge Bulb
* This headlight does NOT fit on with Factory Halogen Models!
* For 2003-2005 Pre-Facelift models, please be sure to GROUND your ballast. The original stock ballast MUST be mounted securely & correctly to avoid moisture build up inside the lens. It is recommend you change the rubber or grommets around the stock ballasts as they by now most likely are wore, so it's weak to protect the light from condensation built-up. Condensation built-up usually occurs due to those wore out components, not due to bad sealant on the new headlight. It is recommended by manufacturer please do not get into car wash within 2 weeks after install to allow the sealant of the new headlight to adjust and settle to the new environment.
* We strongly recommend that you change the new OEM seal gasket rings (OEM Part # 26033-CD010 and you need one ring per headlight side) on your headlights when replacing with the new Umnitza headlights. Your stock seal gaskets most likely have worn out over time and are no longer able to sufficiently prevent moisture/condensation as it is designed to. The OEM seal gasket is rather inexpensive (around $7.00 apiece) and is crucial to ensuring that our new Umnitza brand headlights will avoid water leak and condensation issues. Condensation is not covered under manufacturer (view image 7 in gallery for illustration).