Description (Please consult your owner's manual for your application fitment type):
This enables all LED units to work as DRL. Anything up to 30A will now be able to operate as DRL without the need to do fancy splice taps into the fuse box or running wires inside your cabin. Just connect as described and your angel eyes will now be DRL (or any other LED you wish to have, like an LED strip, or even your DRL LED driving lights).
It also has a built in timer for 5-10 seconds depending on settings.
Red Wire: Battery "+"
Black Wire: Battery "-" (GND)
Blue Wire: Right side turn light "+" (illuminate together with right turn light)
Brown Wire: Left side turn light "+" (illuminate together with left turn light)
White Wire: Headlight low beam "+" (With Headlights, DRLs reduced to 50% brightness)
Yellow Wire: Connect only if you want to run the DRL as switched power
Orange Wire: Secondary Trigger element - allows enabled the LED/Angel eyes with "horn", high beams, or other electrical trigger.
9-32V DC Intelligent Controller
1 heavy gauge wiring harness
1 LED Driver
30-50 minute complete install using standard hand tools per side.